We provide technologies that optimize heating, ventilation, and air condition control systems to decrease energy costs and improve thermal comfort. We supply a range of Air Heating and Cooling, Commercial Hot Water Boilers and Radiant Infrared Heating Boilers for indoor, outdoor, domestic, commercial, industrial and process applications.
VISIT SKYBLADE FANS ONLINE STORE
SkyBlade Fans High Volume Low-Speed Fans are specially designed to move more air at lower operating speeds. They don't just look cool; they deliver top efficiency to heating and cooling systems by reducing their run time and cycles and improving overall occupant comfort and morale.
VISIT RADIANT HEATER ONLINE STORE
Our industry-leading radiant infrared high and low-intensity heating products efficiently heat large open indoor areas such as factories, warehouses, restaurants, breweries, multi-purpose halls and other commercial and industrial buildings. All our products are energy-efficient and effective at producing consistent heat.
AIR HEATING AND COOLING
The air heating range covers units from small commercial Warm Air Furnaces (Unit Heaters) to floor-located Cabinet Heaters using oil, gas or waste oil burners. For cooling and destratification, we offer SkyBlade high volume low speed fans and Combat destratification fans, saving energy and improving overall comfort.
Variable speed, high efficiency and a colour touchscreen make CTC GSi 12 and CTC EcoAir 510M two of the best heat pumps in their class. When you choose a heat pump from CTC, you are also choosing a professional installation and plenty of worry-free years to come.
Product Downloads
The CTC EcoAir 510M is a variable-speed air-to-water heat pump with an output of 2-10 kW that automatically adapts to the output requirements of your home or property during the year. When high output is required, the output increases. When less output is required, the compressor shifts to lower output. This means that you will always achieve maximum savings.
The CTC EcoAir 510M is optimised to make the best possible use of eco-friendly energy in the air. It converts energy in the air into heating and hot water, and requires no boreholes or coils in the ground. The CTC EcoAir 510M has automatic defrosting, which results in more heat, more power and a longer service life. The CTC EcoAir 510M is, of course, fitted with a heated condensation water tray.
The CTC EcoAir 510M should always be installed with one of our indoor modules (we recommend the CTC EcoZenith i350) for control and hot water. To make heating and hot water adjustment easy, our indoor modules have colour touchscreens.
The CTC EcoZenith i350 indoor module is equipped with a highly efficient water heater, which produces over 300 litres of hot water.
If you would like to connect CTC EcoAir 500 to your existing installation, just add the CTC EcoLogic Pro/Family control module. A unique control system that monitors and regulates the CTC’s heat pumps, solar panels, additional heating, buffer tank, swimming pool, cooling, etc. for up to four different heating systems. If the energy requirement is particularly large, up to ten pumps can be run together.
All CTC heat pumps and boilers are designed, developed and manufactured in our factory in Ljungby. This gives us total control of all stages of the production process – from manufacturing to delivery of the finished product.
Benefits:
- Best Energy class A+++
- Produces up to 80 % lower heating costs
- Heat pump with a low noise level
- Very high seasonal coefficient of performance: 4.6 SCOP
- Provides heating down to -22 °C and produces water up to 65 °C
- Inverter-controlled compressor
- Built-in condensation water tray
- Can be controlled from a smartphone with CTC Connect+
Product Download
Speed-controlled air-to-water heat pumps, models 610M-622M, 2.5-22 kW
CTC EcoAir 600M is a series of ultra-efficient, speed-controlled air-towater heat pumps which automatically adapt to the heating needs of houses, properties or small industrial premises during the year. When high output is required, the output increases. When less output is required, the compressor shifts to lower output. This means that you will always achieve maximum savings.
CTC EcoAir 600 is optimised to make the best possible use of eco-friendly energy in the air. It converts energy in the air into heating and hot water and does not require boreholes or coils in the ground. CTC EcoAir 600M has automatic defrosting, resulting in more heat, power, and a longer service life. CTC EcoAir 600M is equipped with a condensation tray with a built-in heater as standard.
CTC EcoAir 600M should always be installed with one of our indoor or control modules for best results. We recommend CTC EcoZenith i350 for control and hot water. To make heating and hot water adjustment easy, all of our indoor modules have colour touchscreens.
The CTC EcoZenith i350 indoor module is equipped with a highly efficient water heater, which produces over 300 litres of hot water. If you use a lot of water, you can connect CTC EcoAir 622M to the CTC EcoZenith i550 Pro all-in-one multi-tank. It has more than 600 litres of hot water, which is enough for 15 shower-loving teenagers.
If you wish to connect the CTC EcoAir 600M to your existing installation, complement with the CTC EcoLogic control module. A unique control system that monitors and controls CTC’s heat pumps, additional heating, buffer tanks, pools, cooling, etc. for up to four different heating systems. If the energy requirement is particularly large, up to ten pumps can be run together.
All CTC heat pumps and boilers are designed, developed and manufactured in our factory in Ljungby. This gives us total control of all stages of the production process – from manufacture up to the delivery of the finished product.
Benefits:
- Best Energy class A+++
- The very low noise level
- Produces up to 80% lower heating costs
- Highest seasonal coefficient of performance (SCOP): SCOP of 4.9
- Condensation water tray with built-in heating
- Provides heating down to -22 °C and produces hot water of up to 65 °C
- Speed-controlled compressor
- Can be controlled from a smartphone with CTC Connect+
Product Downloads
Speed-controlled heat pumps for ground source, lake or geothermal heating. 2.5-16 kW, models 12 and 16
CTC GSi adapts automatically to the building’s output requirements during the year. When high output is required, the output increases. When less output is required, the compressor shifts to lower output. This means that you will always achieve maximum savings.
CTC GSi is equipped with a highly efficient water heater, which produces over 300 litres of hot water. CTC GSi is ideal for family homes as well as larger properties. CTC GSi comes in 2 sizes, which enables it to be utilised in most properties. CTC GSi 12 with an output range at 2.5-12 kW and CTC GSi 16 at 4-16 kW.
CTC GSi has a seasonal coefficient of performance (SCOP) of 5.5, which means that, over the course of year, it produces 5 times as much energy as it consumes. Compressor and cooling components are enclosed in a separate, sound-insulated unit, which makes it very quiet – only 36 dB(A) at 50 rps. Furthermore, the entire heat pump has very efficient insulation, which minimises energy losses. CTC GSi is so energy efficient that it easily meets the requirements for an A+++ rating – the highest and best energy rating a heat pump can be given.
CTC GSi has a stylish white design and flexible modular dimensions that allow it to fit into most environments. Owing to the heat pump’s modular construction, it can be easily separated into two individual units. The brine system can be connected to the right, left or rear. All for simple and easy installation. The 4.3-inch colour touchscreen has clear symbols with English text, which makes it easy to adjust the heat and hot water or to retrieve a range of information about the operation.
Do you have an old heat pump that needs to be replaced? No problem. CTC GSi automatically adapts to the existing borehole. This means that when you replace your old heat pump, your installation costs are significantly reduced. The built-in automatic control is climate controlled and takes into account both indoor and outdoor temperatures. CTC GSi is able to control two individual heating systems as standard.
All CTC heat pumps and boilers are designed, developed and manufactured in our factory in Ljungby. This gives us total control of all stages of the production process – from manufacture up to delivery of the finished product.
Benefits
- Highest energy rating – A+++
- Produces over 300 litres of hot water
- Very high seasonal coefficient of performance: SCOP 5.5
- Smart Grid – ready to adapt to electricity prices
- Can control two heating systems
- All-inclusive, most functions come as standard
- Easy to install
- 4.3” colour touchscreen
- Very quiet, 36 dB(A)
- It can be controlled from a smartphone with CTC Connect+
The NewTech industrial directional air cooler, Ouber, is an effective evaporative cooling system. It circulates water within the cooling pad system to expel cool air. This lessens the cooler’s dependency on the utility power to create the cooling effect while decreasing the cost of power consumption.
Ouber can handle 5000 litres per second and easily create an airflow covering an area of 150m².
Other benefits of choosing Ouber:
- No additional tools are required & minimal labour
- Reduce workflow interruption
- Cost saving
- Easy to clean and maintain
- Easy to move and relocate
Nu-Way Energy offers ventilation solutions for small or large factories, warehouses, and industrial and commercial sites. These exhaust fans work efficiently and reliably in most applications and environments.
Industrial Wall Exhaust Fan is made in Australia. It is an economical air ventilation system customised to suit Australian conditions. This Industrial Wall Exhaust Fan can also fit in a double brick wall cavity to flush the air out to the outside wall, allowing better airflow and circulation.
The Fanmaster hooded exhaust roof fan is a powerful roof extractor that works in all types of weather. It can move a large volume of air, effectively extracting fumes or dust. This is designed to be used for a variety of applications such as general ventilation, heat or smoke fumes, moisture-laden air, and even extracting mild contaminants in the air stream.
This Fanmaster exhaust roof fan can help lower temperatures during the hotter months.
Product Download
The Combat HVE range of fans is primarily designed for installation in high bay applications to return warm air down to ground level [destratification]. Natural convection increases the temperature gradient with any conventional warm air heating system. This results in the ambient temperature at the apex of the roof being more significant than the required design temperature in the occupied zone at floor level. By using a system of destratification fans, the hot air in the roof space is directed down to the required area, thus reducing the heating load. Fans are supplied with built-in thermostats to allow for automatic stop-start operation when the temperature at the fan location rises 3°C above the set point. Complete fan information and selection/sizing information is included in the product brochure.
For applications where cooling is also a factor, consider SkyBlade HVLS fans.
The Combat range of indirect air heaters includes Warm Air Furnaces, ranging from 24 up to 400 MJ output, and Cabinet Heaters, ranging from 160 up to 1000 MJ. Appliances are either fan-assisted [Furnaces] or forced draft [Cabinet].
A tubular steel heat exchanger system is used in the Warm Air Furnaces, achieving up to 90% thermal efficiency, and the units may be operated on Natural Gas or LPG. A range of styles is available, ranging from suspended room discharge through to full 'in-duct' models.
At Hurll Nu-Way, we pride ourselves on the wide range of our products. We also stock a range of durable infrared heating equipment!
Our cabinet heaters are available with Gas fired; Diesel fired or Waste Oil fired burners. Cabinet style may be vertical, horizontal or weatherproof, and units have a standard drum and tube heat exchanger. For special custom applications, drum and tube heat exchangers are also available.
Save floorspace with a durable ceiling-suspended industrial fan heater. Available in various sizes, you are sure to heat up rooms of multiple sizes efficiently and reliably. With both free-blowing and duct connection capabilities, this heater allows for a range of customisations to better suit your heating needs.
Roberts-Gordon Combat Cabinet Heaters are free-standing indirect-fired units suitable for most industrial and commercial applications with a large range of heat outputs and burner options. Nine basic model sizes can be fitted with bolt-on package burners for operation on Natural or LP Gases, oil or waste oil. Units are available in horizontal or vertical configurations and for external locations. Various control and air discharge systems are available.
Unit heaters are available in a range of sizes from 7.1 kW Output up to 111 kW Output.
The CTCU range is compact low, output units, available in 6 sizes from 7 up to 32 kW and are designed to be ceiling suspended and for free blowing applications. Units are fitted with axial fans and cannot be ducted.
The CTU range are larger units from 23 up to 111 kW [10 models] and are available as 4 versions: A units have axial fans for free blowing applications; B units have centrifugal fans and can be either free blowing or connected to duct work. C units have duct connections at the front and rear for installation in a section of ducting, and the D models are supplied without a fan for use in ducting with air supply from existing or other sources.
PORTABLE HEATING SOLUTIONS
Through our microsite www.radiantheater.com.au we can offer a wide range of portable heaters for a variety of applications and industries.
We have 2 types of industrial portable infrared heaters that are designed to be used with portable gas bottles. They come in either an industrial or Café style and work with various heaters.
We are also suppliers of a large range of portable electric space heaters.
Heat your space the efficient way with Nu-Way Energy. We offer high-quality portable infrared radiant panel heaters from SBM. Similar to plaque heaters, these LPG-fired heaters use high-efficiency ceramic heating elements to deliver even, carefully controlled heat throughout the area.
Available in a range of sizes and capacities, SBM heaters are the effective choice for any business looking to keep their space evenly heated. Improve morale and productivity and meet occupational health and safety regulations with help from SBM and NWE. Start a conversation with a consultant today and find out how our heaters could support you.
Why our outdoor gas heaters?
The GM series is best suited for operation in commercial and industrial premises. SBM heaters can warm areas of up to 40m2, making them an economical choice for even the largest premises. They can be used to heat warehouses, workshops, garages, and auto repairs and allow applying the heat when and where it is needed. They are built to last over 20 years and are a great alternative to conventional outdoor patio gas heaters.
The commercial standard GM series has a powder-coated foldaway steel trolley suitable for up to 45kg cylinders. The heater is supplied in kit form with trolley, hose assembly with adjustable gas pressure regulator. Three models are available – GM12SPC, GM16SPC using the 4 and 5 tile ceramic tile assemblies. All models are approved for outdoor applications when shielded from rain and wind speed more than 15 kph and can also be used on patios, verandahs, and outdoor cafe areas.
Portable patio heaters from SBM (France) are LPG-fired high-intensity infrared radiant panel heaters specially designed for cafes. Ceramic infrared heaters are perfect not only for cafe and restaurant outdoor areas but also for rental and catering businesses and for use on private verandahs and patios. The portable infrared heaters are designed for an operational life of more than 20 years and provide an energy-efficient alternative to standard patio and pyramid heaters.
The HeatGlo 12 and 16 feature a stainless steel trolley / 9kg cylinder housing unit and are supplied in kit form with a trolley and hose assembly with an adjustable gas pressure regulator. The two models incorporate the standard 4 tiles and 5 tiles SBM ceramic tile assemblies. All models are approved for outdoor applications when shielded from rain and wind speed more than 15 kph, including residential applications such as verandahs and patios. Compare fuel consumption of ceramic heaters with patio and pyramid style heaters and check their total cost of ownership.
The video details the assembly of the HeatGlo trolley unit. In addition, there is a ‘servicing‘ video in the ‘Livestock High Intensity’ section of the website. Check out our YouTube video showing how to connect a gas cylinder and operate the heater.
You can find all the radiant tube heater information at our new micro-site focusing only on radiant heaters at radiantheater.com.au.
Product Downloads
Features
- Available in 3 sizes
- Safety cut-off switch
- Adjustable thermostat
- Multiple heat settings
- Fan only option
- Run on fan timer
- Adjustable airflow direction
- Portable with wheels (PESH15/30)
- Portable with handle (PESH9)
Advantages
- Allows for correct heater selection
- Increased safety measures
- Ability to control the temperature
- Reduced power and running cost
- Can be used as a fan only
- Ensures elements are cooled down
- Ability to direct airflow where required
- Easy to move and relocate
Benefits
- Multiple applications
- Reduced risk of hazards
- Controlled heating
- Saves money
- Versatile
- Reduced risk of hazards
- Multiple applications
- Ability to move to specific work areas
COMMERCIAL HOT WATER BOILERS
Hot water boilers are used for hydronic heating and hot water as well as for process applications, such as cleaning, rinsing and washing. A range of high-efficiency commercial hot water boilers is available, including condensing boilers, cast iron boilers and solid fuel boilers. Engineered and manufactured in Europe, they are reliable and modern, offering reduced emissions and energy savings. We help select the boiler depending on the fuel available and the output required.
Cast-iron boilers may be used in steam heating or hot water heating applications. We supply Belgian boilers Saint Roch suitable for commercial and industrial applications. The main features of our cast iron boilers:
- COMPLETE RANGE: The range covers up to 430 kW
- LOW TEMPERATURE The boiler operates at low temperature or at a sliding temperature so as to optimise the seasonal use of heating. The boiler remains cold when there is no heating and domestic hot water demand. The circulation pump timer maximises the use of energy accumulated by cast iron.
- INFALLIBLE TECHNIQUE Elements are assembled by biconical steel nipples. The combustion chamber is pressurized. The gas flow passes upwards. And the heating body is scavenged uniformly. The combustion chamber is fully surrounded by water. It does not have any dry surface except for the combustion chamber door. The joint between heating body elements is sealed by a refractory cord.
Condensing boilers provide energy savings compared with conventional boilers by recovering all or part of the heat lost by water vapour in the flue gas. The Superior Condensing Boiler offers significant energy savings and emissions reduction in conjunction with fully modulating operation.
The main features of the Superior condensing boiler are:
- The lightweight aluminium heat exchanger with a gross efficiency of up to 98.5%
- The integrated premix burner guarantees maximum mixing of gas and air, over a wide turndown range of 5:1, which results in minimal releases of harmful substances.
- An integrated microprocessor control system, with fully configurable options for central heating and hot water and enabling interface with BMS.
- All relevant gas approvals